stgtech
New Member
Posts: 5
|
 |
« on: November 13, 2007, 09:07:43 PM » |
|
I noticed a FC-4 unreleased driver was posted in another thread. Is there any progress on the Vixen driver for the DC-16. Even a rough driver would be helpfull.
Thanks much.
|
|
|
|
|
|
JonnyMac
|
|
« Reply #1 on: November 13, 2007, 10:16:00 PM » |
|
We'll have updated drivers for the DC-16, FC-4, and RC-4 shortly; I'm working with KC to make the all consistent.
|
Jon Williams
EFX-TEK
|
|
|
wseay
New Member
Posts: 30
|
|
« Reply #2 on: January 06, 2008, 05:22:28 PM » |
|
Howdy Jonny:
I am looking for a Vixen driver for the DC-16. Is this going to be a separate driver, or is it going to be rolled into the combo driver?
Thanks.
|
|
|
|
|
|
JonnyMac
|
|
« Reply #3 on: January 07, 2008, 09:42:12 AM » |
|
Sorry, with the holiday crunch and all the excitement about the RC-4 I kind of forgot the DC-16 -- will get back on it.
|
Jon Williams
EFX-TEK
|
|
|
wseay
New Member
Posts: 30
|
|
« Reply #4 on: January 07, 2008, 02:19:23 PM » |
|
Thanks Jonny!!
I am trying to move my Christmas show control from a proprietary system to Vixen. The DC-16 boards will be used to drive props in my display. I have the Gemmy Deer head running and a seated Santa (head turns l/r, eyes & mouth control). Currently working on the Singing Polar Bear and his Penguin backup singers.
Walter...
|
|
|
|
|
wseay
New Member
Posts: 30
|
|
« Reply #5 on: February 04, 2008, 01:57:10 PM » |
|
Howdy Jon:
Just checking to see if there is an update on the DC-16 driver for Vixen.
|
|
|
|
|
|
JonnyMac
|
|
« Reply #6 on: February 04, 2008, 03:52:55 PM » |
|
Sorry, I've been swamped. KC just sent me an update; I'll try to get it tested this week.
|
Jon Williams
EFX-TEK
|
|
|
wseay
New Member
Posts: 30
|
|
« Reply #7 on: February 05, 2008, 05:14:50 PM » |
|
Jon: Thanks for the update. I fully understand 'swamped!'  Within the next two weeks will be fine for me. Walter... |
|
|
|
|
wseay
New Member
Posts: 30
|
|
« Reply #8 on: May 23, 2008, 10:54:35 AM » |
|
Howdy Jon:
Do you have an update on adding the DC-16 to Vixen?
Thanks...
|
|
|
|
|
|
JonnyMac
|
|
« Reply #9 on: May 23, 2008, 02:22:31 PM » |
|
Not yet, but it is on my list, I promise. I need to solder up some LED boards to test the DC-16s I recently liberated from our stock at Maker Faire! I'll try to get that done this weekend. Thanks for being so patient.
|
Jon Williams
EFX-TEK
|
|
|
wseay
New Member
Posts: 30
|
|
« Reply #10 on: May 27, 2008, 12:11:52 AM » |
|
Thanks for the update.
|
|
|
|
|
wseay
New Member
Posts: 30
|
|
« Reply #11 on: July 03, 2008, 08:30:30 AM » |
|
Howdy Jon:
Just checking on the DC16 driver for Vixen. If I can offer any assistance in testing, I am very willing to do so.
Walter...
|
|
|
|
|
|
JonnyMac
|
|
« Reply #12 on: July 03, 2008, 09:23:51 AM » |
|
Walter, There is one last "gotcha" in the new DC-16 driver -- I just sent KC a note and I think we should be able to fix it pretty quickly. Thanks, again, for your patience with us. We actually rewrote the whole driver so that it is is consistent with the RC-4/FC-4 driver setup. Here's what the setup dialog looks like -- just so you know it's not a ghost!   |
Jon Williams
EFX-TEK
|
|
|
wseay
New Member
Posts: 30
|
|
« Reply #13 on: July 03, 2008, 02:37:26 PM » |
|
Thanks for the update.
Looking forward to getting my props moving.
Walter...
|
|
|
|
|
|
