www.efx-tek.com Sales: 916.770.9244
Support: 916.616.1658
teamefx@efx-tek.com

Online Store
Support Forums
Main • Starter Kits • Controllers • I/O Enhancement • I/O Amigos • Audio • Sensors • Accessories • Hardware • Specials
12 VDC | BS1 Serial Adapter | SX-Blitz (USB) | USB-Serial Adapter | Serial Inverter | 2.1mm Pigtail | ULN2x03 | Resonators


2.1mm Pigtail 2.1 mm Pigtail Cable
Stock #: 805-00750
Price: $3.00
Manufacturer:

Buy Now!


Description
If you've ever wanted to use a single "wall wart" to run a prop controller and a powered accessory like the FC-4, now you can.

Using the pigtail is as easy as connecting the "+" lead to the V+ terminal of your controller and the "-" lead to the GND terminal of your controller -- then plug the barrel connector into you accessory and you're good to go! Move your accessory's power switch to its "On" position and when the prop controller power switch is moved to P2 the accessory will operate. Yes, it's that easy.

Important Note
When using the pigtail to provide accessory power you must ensure that the power supply used with the controller can provide enough current for the controller load(s) and the anticipated accessory load(s).