Print Page - EZ-8 to RC-4 (Connection Diagram)

Title: EZ-8 to RC-4 (Connection Diagram)
Post by: JonnyMac on September 13, 2009, 08:47:43 PM

You can use the Xn (X1 - X4) inputs on the RC-4 to control 120 VAC circuits with the RC-4; for each channel of control you'll need a 14" extension cable.

(http://www.efx-tek.com/files/ez-8_to_rc-4.png)

Title: Re: EZ-8 to RC-4 (Connection Diagram)
Post by: dvdbob on September 13, 2009, 08:56:13 PM

Thank you. That's what I thought. I love this EZ-8.

EFX-TEK

TEK Talk => EZ-8 Touch Controller => Topic started by: JonnyMac on September 13, 2009, 08:47:43 PM