Just wanted to make sure that I can do this. I know that the docs on the EZ 8 say
QuoteFrom Another Controller/Device
Connect a 12- to 24-volt DC start input to the 12-24V INPUT terminals. When the voltage is present the program
will start.
Note: The 12-24V start input is not polarized but does require DC (AC will not work due to input
debouncing to prevent false starts from transient inputs.
just wanted to make sure I can before I hook it up
Yes. Connect Prop-1 V+ and OUTx to the 12-24 terminals on the EZ-8. Make the output at least 100ms.
Alright thanks John