I have an old puzzle that runs on a prop2 controller. The computer that was used for programming it was stolen. Can I download the code off the Prop2 or has it become a relic?
Thanking y'all in advance.
Sorry, programming a Prop-1 or a Prop-2 (or any microcontroller) is a one-way process. The source code gets converted into a small version that removes all the human-readable stuff and fits onto the controller.
However, if you can completely describe what the program does - all the buttons/switches, every light or buzzer - then it's possible to write new code that will work the same way the original code did.
Have you programmed in Parallax Basic much? I've done quite a bit and might be able to help.
I looked up your old posts and found the discussion where you had JonnyMac helping you with the code.
Is this it? Scroll to the last post:
https://www.efx-tek.com/php/smf/index.php?topic=2311.15
Thanks for the reply.
I will give that code a try. I don't remember if we modified it after that. I will reach back out and let you know how it goes. I appreciate your help
Steve