Hi all,
I am looking to be able to control 2 Flash Crackers via a Prop-1. These draw up to 2A each, according to the web page:
http://www.frightprops.com/electronic-firecracker-props/flash-crackers-accessories/flash-cracker.html
I am looking at both the SSR-2 and RC-2 Amigo boards and it looks like either one will do the trick amperage-wise. What are the benefits to choosing one over the other? Which would you choose?
Thanks in advance!
I'd be inclined to go with the SSR-2. Both will work, but the surge when close the contacts of the RC-2 will eventually cause pitting. The relays on the SSR-2 are rated for 8A, so you're safe.
Thanks John!
You're welcome, Rohbert!