Hi all. The new Prop 1 I received last week has 2005 - 2016 printed on it, and incorporates a very flat miniaturized ULN2803A. Before I break something; can this ULN be removed and modified to act as a ULN2003? If so, are ULN2003s' of the miniature persuasion available so I can order a few?
Thanks much.
Steve
Well, you cannot desolder that dude -- unless you're as good as John B. There is an addendum to the documentation on the Prop-1 page:
-- http://www.efx-tek.com/downloads/prop-1_revG_addendum.pdf
This shows how to disable the ULN on P7 and P6.
Ok, I'll work that one.
Now one more question: I also noticed on this prop-1 that one of the jumpers for the P6 and P7 down/up configuration is missing. Is this an item I can find locally? (Radio Shacks are closing left and right around here)
If not, am I able to order one (or maybe a few) through EFX TEK? I don't think I've seen them as stand alone items.
That is all.
Thanks much.
Steve
Sorry, that shouldn't have happened. You can probably find them in a Fry's or similar store, or in a store that builds computers. They're called shorting blocks. Take the board with you so that people know what you mean.