May 16, 2024, 10:02:14 PM

News:

Be sure to checkout our Vixen interfaces in the Library forum -- if you want PC automation at near zero cost, EFX-TEK and Vixen is a great combination of tools.

Using AP-16+ Terminal Block B to Power DC-DC . . .

Started by bill chennault, January 28, 2011, 10:26:32 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

bill chennault

January 28, 2011, 10:26:32 AM Last Edit: January 28, 2011, 10:28:20 AM by bill chennault
JonnyMac--

Is it "safe" to use AP-16+ terminal block B as a source for a DC-DC regulator to power a microcontroller? I am using your recommended power supply.

If this is possible, how many milliamps could be drawn?

--Bill
You are what you write.

JonnyMac

January 28, 2011, 10:39:41 AM #1
That connects directly to the input so, yes.  The AP-16+ uses a couple hundred milliamps when idle, the real current draw is when it's playing loudly.  You just need to ensure that the power supply you're using can handle the volume you want plus the load from the terminal block.
Jon McPhalen
EFX-TEK Hollywood Office
User actions
Print
Go Up Pages1