Print Page - Vixen and DC-16 connectivity

Title: Vixen and DC-16 connectivity
Post by: kenqu on September 16, 2009, 03:52:08 PM

I have two questions about connecting the DC-16 to my computer running vixen.

1. Do you use the BS1 serial adapter to connect the DC-16 to the computer, if not how do you accomplish this?
2. After looking at the output plugin setup for the DC-16 in Vixen, it appears that the channel groups drop downs are to assign addressing for different DC-16 boards. Is this to support daisy chaining multiple boards (up to 4)?

Thanks

Title: Re: Vixen and DC-16 connectivity
Post by: JonnyMac on September 16, 2009, 03:55:42 PM

1. No, you must use the Serial Inverter
-- http://www.efx-tek.com/topics/serial_inverter.html

You don't need to connect a power supply for the DC-16 (you do if using the RC-4)

2. Yes, you can have up to four DC-16s in a chain.

EFX-TEK

TEK Talk => Library => Vixen => Topic started by: kenqu on September 16, 2009, 03:52:08 PM