May 18, 2024, 05:36:05 AM

News:

Got VSA?  Want to use your Prop-SX?  Now you can!  See the VSA section of the Library forum for Prop-SX code that works with VSA.

EZ-8 triggered by Prop 1

Started by Lotus, October 28, 2010, 05:15:34 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Lotus

October 28, 2010, 05:15:34 PM
Just wanted to make sure that I can do this. I know that the docs on the EZ 8 say
QuoteFrom Another Controller/Device
Connect a 12- to 24-volt DC start input to the 12-24V INPUT terminals. When the voltage is present the program
will start.
 Note: The 12-24V start input is not polarized but does require DC (AC will not work due to input
debouncing to prevent false starts from transient inputs.

just wanted to make sure I can before I hook it up

JonnyMac

October 28, 2010, 05:43:56 PM #1
Yes.  Connect Prop-1 V+ and OUTx to the 12-24 terminals on the EZ-8.  Make the output at least 100ms.
Jon McPhalen
EFX-TEK Hollywood Office

Lotus

October 28, 2010, 05:44:31 PM #2
Alright thanks John
User actions
Print
Go Up Pages1