Hey John here is the program.  John, The Bates Motel

There's no problem with the program.  Things to check:

1) Make sure you have ULN2003 in the P8..P15 socket or clip pin 1 of the ULN2303
    -- for details: http://www.efx-tek.com/php/smf/index.php?topic=130.0

2) Make sure that the P15 SETUP jumper is UP or out

3) Make sure the WRB wire is not broken and is connected to P15 on the Prop-2 side and the Serial input on the AP-8 side
   -- watch the polarity on the AP-8 side (it's marked)

4) Make sure that you have your sound recorded into slot 0 (segment switches Closed -- usually the up position)

5) After you've recorded move the AP-8 segment switches to Open (usually the down position)

6) Make sure the B/R jumper on the AP-8 is installed and the that the A0 and A1 jumpers are removed.