|
Sales: 916.770.9244 Support: 916.616.1658 teamefx@efx-tek.com Online Store Support Forums |
| Main Starter Kits I/O Enhancement I/O Amigos Audio Sensors Accessories Hardware Specials |
| Prop-1 Prop-2 EZ-3micro HC-8+ Programming Software |
|
EZ-8+ Touch Controller™ Stock #: 31108 Price: $130.00 Manufacturer: EFX-TEK
• 2 Shows - Show 1 ~6.8 minutes @ 20FPS * can be looped for "attract" mode - Show 1 ~20.4 minutes @ 20FPS • 8 channels; ULN2803 and TTL outputs for each - Channel LEDs display status during programming and playback - Separate SIO output for AP-16+ control (by show) • Flexible choices: - 12- to 24-volt optically-isolated inputs (2) - Dual 5v male headers (2) -- compatible with PIR sensor - START button (uses show select switch) - any or all inputs can be used simultaneously • Multi-mode status LED keeps you informed: - solid green: ready to play; flashing green: playing - solid red: ready to record; flashing red: recording - solid yellow: ready to erase; flashing yellow: erasing - extinguished: PC mode • Start/Stop programming; no need to hold the START button down for long shows • Easy to select, program, or erase an individual channel - you can erase the whole show, or just one channel - show length automatically adjusts with any channel update PC Programming with Vixen
Whether you want to copy a show from one EZ-8+ to another or use your PC to create a new show, Vixen is ready to help you. Vixen's creator, K.C. Oaks, has graciously created custom plug-ins and add-ins that allow us to use Vixen as an EZ-8/EZ-8+ programming tool -- and it's absolutely free! When using Vixen you are not locked to 20FPS for either show; you may set the frame timing from 20ms (50FPS) to 250ms (4FP) -- individually, by show -- for the greatest flexiblity in sequence programming. EFX-TEK uses Vixen 2.1 for EZ-8/EZ-8+ programming. Version 3.x is not compatible at this time.
Downloads
Support
|